AAA City Plumbing Inc "Your Plumber For Life"

Why do showerheads need cleaning?

Showerheads often spray unevenly because their tiny holes have gotten plugged with mineral deposits. In order for water to flow freely, you need to remove these deposits. To do that, you may want to soak the showerhead in in vinegar. Above is an illustration that's simple and can be left over night for an effective cleaning. If the results are not satisfactory the next day then follow the steps below:
Advanced Cleaning
If mineral deposits prove to be beyond the power of vinegar alone, you will need to remove the showerhead to do a more thorough cleaning.

Disconnect the showerhead. To disconnect the showerhead, unscrew the nut at the shower arm. Take care not to mar the fixture's finish. Use a wrench rather than pliers. Cushion your tool with a rag while you work.

Rinse the showerhead. Run a sharp blast of water through the showerhead by holding it upside down underneath a faucet. Your goal is to rinse loosened debris out through the opening that connects to the shower arm

Dismantle and clean the showerhead. If there are still mineral deposits, you can scrub the showerhead with an old toothbrush and vinegar to loosen debris. Use a toothpick or safety pin to poke out additional deposits. Then soak the parts in vinegar overnight to dissolve any remaining deposits. Rinse again.
Note: Some showerheads boast pliable plastic nubbins that can be manipulated to break calcium deposits loose.

Reassemble and reinstall your showerhead. First wrap new plumbing tape around the threads of the shower arm to ensure a good seal. Reattach the showerhead to the shower arm using the wrench. Protect the fixture's finish with soft rags or towels while you're working.
As always, you can give us a call 704- 544-1909 .